diff --git a/.github/workflows/main.yml b/.github/workflows/main.yml
index 3f79f7b..55ce096 100644
--- a/.github/workflows/main.yml
+++ b/.github/workflows/main.yml
@@ -27,17 +27,17 @@ jobs:
       matrix:
         include:
           - id: test
-            file: tests/test1.yaml
-            name: Test tests/test1.yaml
-            pio_cache_key: test1
-          #- id: test
-          #  file: tests/test2.yaml
-          #  name: Test tests/test2.yaml
-          #  pio_cache_key: test2
-          #- id: test
-          #  file: tests/test3.yaml
-          #  name: Test tests/test3.yaml
-          #  pio_cache_key: test3
+            file: tests/test.esp32_ard.yaml
+            name: Test tests/test.esp32_ard.yaml
+            pio_cache_key: test.esp32_ard
+          - id: test
+           file: tests/test.esp32_idf.yaml
+           name: Test tests/test.esp32_idf.yaml
+           pio_cache_key: test.esp32_idf
+          - id: test
+           file: tests/test.rp2040.yaml
+           name: Test tests/test.rp2040.yaml
+           pio_cache_key: test.rp2040
 
     steps:
       - uses: actions/checkout@v3
diff --git a/test/test1.yaml b/test/test1.yaml
deleted file mode 100644
index 996eabe..0000000
--- a/test/test1.yaml
+++ /dev/null
@@ -1,242 +0,0 @@
-esphome:
-  name: "truma_esp32_ard"
-
-  on_boot:
-    then:
-      # read time from external source (connected via I2C)
-      - ds1307.read_time
-
-external_components:
-  - source:
-      type: local
-      path: ./components
-    components: ["truma_inetbox", "uart"]
-
-esp32:
-  board: mhetesp32devkit
-  framework:
-    type: arduino
-
-i2c:
-  sda: 14
-  scl: 27
-  scan: false
-  id: i2c_bus_a
-
-time:
-  - platform: ds1307
-    update_interval: never
-    id: esptime
-
-uart:
-  - id: lin_uart_bus
-    tx_pin: 17
-    rx_pin: 16
-    baud_rate: 9600
-    data_bits: 8
-    parity: NONE
-    stop_bits: 2
-
-truma_inetbox:
-  uart_id: lin_uart_bus
-  time_id: esptime
-  cs_pin: 5
-  fault_pin: 18
-  # Advanced users can use `on_heater_message` action. The heater data is in the `message` variable.
-  on_heater_message:
-    then:
-    - logger.log: "Message from CP Plus."
-    - if:
-        condition:
-          lambda: return message->operating_status == truma_inetbox::OperatingStatus::OPERATING_STATUS_OFF;
-        then:
-          - logger.log: "Heater is off."
-
-binary_sensor:
-  - platform: truma_inetbox
-    name: "CP Plus alive"
-    type: CP_PLUS_CONNECTED
-
-  - platform: truma_inetbox
-    name: "Room Heater active"
-    type: HEATER_ROOM
-    id: HEATER_ROOM
-  - platform: truma_inetbox
-    name: "Water Heater active"
-    type: HEATER_WATER
-    id: HEATER_WATER
-  - platform: truma_inetbox
-    name: "Heater mode Gas"
-    type: HEATER_GAS
-  - platform: truma_inetbox
-    name: "Heater mode Mix 1"
-    type: HEATER_MIX_1
-  - platform: truma_inetbox
-    name: "Heater mode Mix 2"
-    type: HEATER_MIX_2
-  - platform: truma_inetbox
-    name: "Heater mode Elec"
-    type: HEATER_ELECTRICITY
-  - platform: truma_inetbox
-    name: "Heater has error"
-    type: HEATER_HAS_ERROR
-
-  - platform: truma_inetbox
-    name: "Timer active"
-    type: TIMER_ACTIVE
-    id: TIMER_ACTIVE
-  - platform: truma_inetbox
-    name: "Timer Room Heater active"
-    type: TIMER_ROOM
-  - platform: truma_inetbox
-    name: "Timer Water Heater active"
-    type: TIMER_WATER
-
-climate:
-  - platform: truma_inetbox
-    name: "Truma Room"
-    type: ROOM
-  - platform: truma_inetbox
-    name: "Truma Water"
-    type: WATER
-
-number:
-  - platform: truma_inetbox
-    name: "Target Room Temperature"
-    type: TARGET_ROOM_TEMPERATURE
-  - platform: truma_inetbox
-    name: "Target Water Temperature"
-    type: TARGET_WATER_TEMPERATURE
-  - platform: truma_inetbox
-    name: "electric power level"
-    type: ELECTRIC_POWER_LEVEL
-
-sensor:
-  - platform: truma_inetbox
-    name: "Current Room Temperature"
-    type: CURRENT_ROOM_TEMPERATURE
-  - platform: truma_inetbox
-    name: "Current Water Temperature"
-    type: CURRENT_WATER_TEMPERATURE
-  - platform: truma_inetbox
-    name: "Target Room Temperature"
-    type: TARGET_ROOM_TEMPERATURE
-  - platform: truma_inetbox
-    name: "Target Water Temperature"
-    type: TARGET_WATER_TEMPERATURE
-  - platform: truma_inetbox
-    name: "Heating mode"
-    type: HEATING_MODE
-  - platform: truma_inetbox
-    name: "electric power level"
-    type: ELECTRIC_POWER_LEVEL
-  - platform: truma_inetbox
-    name: "Energy mix"
-    type: ENERGY_MIX
-  - platform: truma_inetbox
-    name: "Operating status"
-    type: OPERATING_STATUS
-  - platform: truma_inetbox
-    name: "Heater error code"
-    type: HEATER_ERROR_CODE
-
-switch:
-  - platform: template
-    name: "Activate Room Heater"
-    lambda: |-
-      return id(HEATER_ROOM).state;
-    turn_on_action:
-      - truma_inetbox.heater.set_target_room_temperature:
-          # You can use lambda functions
-          temperature: !lambda |-
-            return 16;
-          # Optional set heating mode: `"OFF"`, `ECO`, `HIGH`, `BOOST`
-          heating_mode: ECO
-    turn_off_action:
-      - truma_inetbox.heater.set_target_room_temperature:
-          # Disable heater by setting temperature to `0`.
-          temperature: 0
-  - platform: template
-    name: "Activate Water Heater"
-    lambda: |-
-      return id(HEATER_WATER).state;
-    turn_on_action:
-      - truma_inetbox.heater.set_target_water_temperature:
-          # Set water temp as number: `0`, `40`, `60`, `80`
-          temperature: 40
-    turn_off_action:
-      - truma_inetbox.heater.set_target_water_temperature:
-          # Disable heater by setting temperature to `0`.
-          temperature: 0
-  - platform: template
-    name: "Activate Water Heater (enum)"
-    lambda: |-
-      return id(HEATER_WATER).state;
-    turn_on_action:
-      - truma_inetbox.heater.set_target_water_temperature_enum:
-          # Set water temp as text: `"OFF"`, `ECO`, `HIGH`, `BOOST`
-          temperature: ECO
-    turn_off_action:
-      # You can also use the simplified syntax.
-      - truma_inetbox.heater.set_target_water_temperature_enum: "OFF"
-  - platform: template
-    name: "Active Timer"
-    lambda: |-
-      return id(TIMER_ACTIVE).state;
-    turn_on_action:
-      - truma_inetbox.timer.activate:
-          start: 7:00
-          stop: 9:30
-          # Required: Set room temp to a number between 5 and 30
-          room_temperature: 13
-          # Optional: Set heating mode: `"OFF"`, `ECO`, `HIGH`, `BOOST`
-          heating_mode: ECO
-          # Optional: Set water temp as number: `0`, `40`, `60`, `80`
-          water_temperature: 0
-          # Optional: Set energy mix to: `GAS`, `MIX`, `ELECTRICITY`
-          energy_mix: GAS
-          # Optional: Set electricity level to `0`, `900`, `1800`
-          watt: 0
-
-    turn_off_action:
-      # You can also use the simplified syntax.
-      - truma_inetbox.timer.disable
-
-button:
-  - platform: template
-    name: "Energy mix GAS only"
-    on_press:
-      - truma_inetbox.heater.set_energy_mix:
-          # Set energy mix to: `GAS`, `MIX`, `ELECTRICITY`
-          energy_mix: GAS
-  - platform: template
-    name: "Energy mix MIX 1"
-    on_press:
-      - truma_inetbox.heater.set_energy_mix:
-          energy_mix: MIX
-          # Set electricity level to `0`, `900`, `1800`
-          watt: 900W
-  - platform: template
-    name: "Energy mix MIX 2"
-    on_press:
-      - truma_inetbox.heater.set_energy_mix:
-          energy_mix: MIX
-          watt: 1800
-  - platform: template
-    name: "Energy mix ELECTRICITY only"
-    on_press:
-      - truma_inetbox.heater.set_energy_mix:
-          energy_mix: ELECTRICITY
-          watt: 1800W
-  - platform: template
-    name: "Set electric power level to 0 Watt"
-    on_press:
-      - truma_inetbox.heater.set_electric_power_level: 0
-  - platform: template
-    name: "Set electric power level to 900 Watt"
-    on_press:
-      - truma_inetbox.heater.set_electric_power_level: 900
-  - platform: template
-    name: "Set electric power level to 1800 Watt"
-    on_press:
-      - truma_inetbox.heater.set_electric_power_level: 1800
diff --git a/tests/test.common.binary_sensor.yaml b/tests/test.common.binary_sensor.yaml
new file mode 100644
index 0000000..b9deba9
--- /dev/null
+++ b/tests/test.common.binary_sensor.yaml
@@ -0,0 +1,38 @@
+  - platform: truma_inetbox
+    name: "CP Plus alive"
+    type: CP_PLUS_CONNECTED
+
+  - platform: truma_inetbox
+    name: "Room Heater active"
+    type: HEATER_ROOM
+    id: HEATER_ROOM
+  - platform: truma_inetbox
+    name: "Water Heater active"
+    type: HEATER_WATER
+    id: HEATER_WATER
+  - platform: truma_inetbox
+    name: "Heater mode Gas"
+    type: HEATER_GAS
+  - platform: truma_inetbox
+    name: "Heater mode Mix 1"
+    type: HEATER_MIX_1
+  - platform: truma_inetbox
+    name: "Heater mode Mix 2"
+    type: HEATER_MIX_2
+  - platform: truma_inetbox
+    name: "Heater mode Elec"
+    type: HEATER_ELECTRICITY
+  - platform: truma_inetbox
+    name: "Heater has error"
+    type: HEATER_HAS_ERROR
+
+  - platform: truma_inetbox
+    name: "Timer active"
+    type: TIMER_ACTIVE
+    id: TIMER_ACTIVE
+  - platform: truma_inetbox
+    name: "Timer Room Heater active"
+    type: TIMER_ROOM
+  - platform: truma_inetbox
+    name: "Timer Water Heater active"
+    type: TIMER_WATER
diff --git a/tests/test.common.button.yaml b/tests/test.common.button.yaml
new file mode 100644
index 0000000..1ae2d7f
--- /dev/null
+++ b/tests/test.common.button.yaml
@@ -0,0 +1,37 @@
+  - platform: template
+    name: "Energy mix GAS only"
+    on_press:
+      - truma_inetbox.heater.set_energy_mix:
+          # Set energy mix to: `GAS`, `MIX`, `ELECTRICITY`
+          energy_mix: GAS
+  - platform: template
+    name: "Energy mix MIX 1"
+    on_press:
+      - truma_inetbox.heater.set_energy_mix:
+          energy_mix: MIX
+          # Set electricity level to `0`, `900`, `1800`
+          watt: 900W
+  - platform: template
+    name: "Energy mix MIX 2"
+    on_press:
+      - truma_inetbox.heater.set_energy_mix:
+          energy_mix: MIX
+          watt: 1800
+  - platform: template
+    name: "Energy mix ELECTRICITY only"
+    on_press:
+      - truma_inetbox.heater.set_energy_mix:
+          energy_mix: ELECTRICITY
+          watt: 1800W
+  - platform: template
+    name: "Set electric power level to 0 Watt"
+    on_press:
+      - truma_inetbox.heater.set_electric_power_level: 0
+  - platform: template
+    name: "Set electric power level to 900 Watt"
+    on_press:
+      - truma_inetbox.heater.set_electric_power_level: 900
+  - platform: template
+    name: "Set electric power level to 1800 Watt"
+    on_press:
+      - truma_inetbox.heater.set_electric_power_level: 1800
diff --git a/tests/test.common.climate.yaml b/tests/test.common.climate.yaml
new file mode 100644
index 0000000..d6fe4bc
--- /dev/null
+++ b/tests/test.common.climate.yaml
@@ -0,0 +1,6 @@
+  - platform: truma_inetbox
+    name: "Truma Room"
+    type: ROOM
+  - platform: truma_inetbox
+    name: "Truma Water"
+    type: WATER
diff --git a/tests/test.common.number.yaml b/tests/test.common.number.yaml
new file mode 100644
index 0000000..298fa66
--- /dev/null
+++ b/tests/test.common.number.yaml
@@ -0,0 +1,9 @@
+  - platform: truma_inetbox
+    name: "Target Room Temperature"
+    type: TARGET_ROOM_TEMPERATURE
+  - platform: truma_inetbox
+    name: "Target Water Temperature"
+    type: TARGET_WATER_TEMPERATURE
+  - platform: truma_inetbox
+    name: "electric power level"
+    type: ELECTRIC_POWER_LEVEL
diff --git a/tests/test.common.sensor.yaml b/tests/test.common.sensor.yaml
new file mode 100644
index 0000000..45970ac
--- /dev/null
+++ b/tests/test.common.sensor.yaml
@@ -0,0 +1,27 @@
+  - platform: truma_inetbox
+    name: "Current Room Temperature"
+    type: CURRENT_ROOM_TEMPERATURE
+  - platform: truma_inetbox
+    name: "Current Water Temperature"
+    type: CURRENT_WATER_TEMPERATURE
+  - platform: truma_inetbox
+    name: "Target Room Temperature"
+    type: TARGET_ROOM_TEMPERATURE
+  - platform: truma_inetbox
+    name: "Target Water Temperature"
+    type: TARGET_WATER_TEMPERATURE
+  - platform: truma_inetbox
+    name: "Heating mode"
+    type: HEATING_MODE
+  - platform: truma_inetbox
+    name: "electric power level"
+    type: ELECTRIC_POWER_LEVEL
+  - platform: truma_inetbox
+    name: "Energy mix"
+    type: ENERGY_MIX
+  - platform: truma_inetbox
+    name: "Operating status"
+    type: OPERATING_STATUS
+  - platform: truma_inetbox
+    name: "Heater error code"
+    type: HEATER_ERROR_CODE
diff --git a/tests/test.common.switch.yaml b/tests/test.common.switch.yaml
new file mode 100644
index 0000000..02e69ff
--- /dev/null
+++ b/tests/test.common.switch.yaml
@@ -0,0 +1,60 @@
+  - platform: template
+    name: "Activate Room Heater"
+    lambda: |-
+      return id(HEATER_ROOM).state;
+    turn_on_action:
+      - truma_inetbox.heater.set_target_room_temperature:
+          # You can use lambda functions
+          temperature: !lambda |-
+            return 16;
+          # Optional set heating mode: `"OFF"`, `ECO`, `HIGH`, `BOOST`
+          heating_mode: ECO
+    turn_off_action:
+      - truma_inetbox.heater.set_target_room_temperature:
+          # Disable heater by setting temperature to `0`.
+          temperature: 0
+  - platform: template
+    name: "Activate Water Heater"
+    lambda: |-
+      return id(HEATER_WATER).state;
+    turn_on_action:
+      - truma_inetbox.heater.set_target_water_temperature:
+          # Set water temp as number: `0`, `40`, `60`, `80`
+          temperature: 40
+    turn_off_action:
+      - truma_inetbox.heater.set_target_water_temperature:
+          # Disable heater by setting temperature to `0`.
+          temperature: 0
+  - platform: template
+    name: "Activate Water Heater (enum)"
+    lambda: |-
+      return id(HEATER_WATER).state;
+    turn_on_action:
+      - truma_inetbox.heater.set_target_water_temperature_enum:
+          # Set water temp as text: `"OFF"`, `ECO`, `HIGH`, `BOOST`
+          temperature: ECO
+    turn_off_action:
+      # You can also use the simplified syntax.
+      - truma_inetbox.heater.set_target_water_temperature_enum: "OFF"
+  - platform: template
+    name: "Active Timer"
+    lambda: |-
+      return id(TIMER_ACTIVE).state;
+    turn_on_action:
+      - truma_inetbox.timer.activate:
+          start: 7:00
+          stop: 9:30
+          # Required: Set room temp to a number between 5 and 30
+          room_temperature: 13
+          # Optional: Set heating mode: `"OFF"`, `ECO`, `HIGH`, `BOOST`
+          heating_mode: ECO
+          # Optional: Set water temp as number: `0`, `40`, `60`, `80`
+          water_temperature: 0
+          # Optional: Set energy mix to: `GAS`, `MIX`, `ELECTRICITY`
+          energy_mix: GAS
+          # Optional: Set electricity level to `0`, `900`, `1800`
+          watt: 0
+
+    turn_off_action:
+      # You can also use the simplified syntax.
+      - truma_inetbox.timer.disable
diff --git a/tests/test.common.truma_inetbox.yaml b/tests/test.common.truma_inetbox.yaml
new file mode 100644
index 0000000..dc0dddb
--- /dev/null
+++ b/tests/test.common.truma_inetbox.yaml
@@ -0,0 +1,13 @@
+  uart_id: lin_uart_bus
+  time_id: esptime
+  cs_pin: 5
+  fault_pin: 18
+  # Advanced users can use `on_heater_message` action. The heater data is in the `message` variable.
+  on_heater_message:
+    then:
+    - logger.log: "Message from CP Plus."
+    - if:
+        condition:
+          lambda: return message->operating_status == truma_inetbox::OperatingStatus::OPERATING_STATUS_OFF;
+        then:
+          - logger.log: "Heater is off."
\ No newline at end of file
diff --git a/tests/test.common.uart.yaml b/tests/test.common.uart.yaml
new file mode 100644
index 0000000..58ce76f
--- /dev/null
+++ b/tests/test.common.uart.yaml
@@ -0,0 +1,7 @@
+  - id: lin_uart_bus
+    tx_pin: 12
+    rx_pin: 13
+    baud_rate: 9600
+    data_bits: 8
+    parity: NONE
+    stop_bits: 2
\ No newline at end of file
diff --git a/tests/test.esp32_ard.yaml b/tests/test.esp32_ard.yaml
new file mode 100644
index 0000000..6d8a203
--- /dev/null
+++ b/tests/test.esp32_ard.yaml
@@ -0,0 +1,38 @@
+esphome:
+  name: "esp32_ard"
+
+  on_boot:
+    then:
+      # read time from external source (connected via I2C)
+      - ds1307.read_time
+
+external_components:
+  - source:
+      type: local
+      path: ../components
+    components: ["truma_inetbox", "uart"]
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+i2c:
+  sda: 14
+  scl: 27
+  scan: false
+  id: i2c_bus_a
+
+time:
+  - platform: ds1307
+    update_interval: never
+    id: esptime
+
+uart: !include test.common.uart.yaml
+truma_inetbox: !include test.common.truma_inetbox.yaml
+binary_sensor: !include test.common.binary_sensor.yaml
+button: !include test.common.button.yaml
+climate: !include test.common.climate.yaml
+number: !include test.common.number.yaml
+sensor: !include test.common.sensor.yaml
+switch: !include test.common.switch.yaml
\ No newline at end of file
diff --git a/tests/test.esp32_idf.yaml b/tests/test.esp32_idf.yaml
new file mode 100644
index 0000000..e0cc804
--- /dev/null
+++ b/tests/test.esp32_idf.yaml
@@ -0,0 +1,38 @@
+esphome:
+  name: "esp32_idf"
+
+  on_boot:
+    then:
+      # read time from external source (connected via I2C)
+      - ds1307.read_time
+
+external_components:
+  - source:
+      type: local
+      path: ../components
+    components: ["truma_inetbox", "uart"]
+
+esp32:
+  board: esp32dev
+  framework:
+    type: esp-idf
+
+i2c:
+  sda: 14
+  scl: 27
+  scan: false
+  id: i2c_bus_a
+
+time:
+  - platform: ds1307
+    update_interval: never
+    id: esptime
+
+uart: !include test.common.uart.yaml
+truma_inetbox: !include test.common.truma_inetbox.yaml
+binary_sensor: !include test.common.binary_sensor.yaml
+button: !include test.common.button.yaml
+climate: !include test.common.climate.yaml
+number: !include test.common.number.yaml
+sensor: !include test.common.sensor.yaml
+switch: !include test.common.switch.yaml
\ No newline at end of file
diff --git a/tests/test.rp2040.yaml b/tests/test.rp2040.yaml
new file mode 100644
index 0000000..28b5fd4
--- /dev/null
+++ b/tests/test.rp2040.yaml
@@ -0,0 +1,38 @@
+esphome:
+  name: "esp32_idf"
+
+  on_boot:
+    then:
+      # read time from external source (connected via I2C)
+      - ds1307.read_time
+
+external_components:
+  - source:
+      type: local
+      path: ../components
+    components: ["truma_inetbox", "uart"]
+
+rp2040:
+  board: rpipicow
+  framework:
+    platform_version: https://github.com/maxgerhardt/platform-raspberrypi.git
+
+i2c:
+  sda: 14
+  scl: 27
+  scan: false
+  id: i2c_bus_a
+
+time:
+  - platform: ds1307
+    update_interval: never
+    id: esptime
+
+uart: !include test.common.uart.yaml
+truma_inetbox: !include test.common.truma_inetbox.yaml
+binary_sensor: !include test.common.binary_sensor.yaml
+button: !include test.common.button.yaml
+climate: !include test.common.climate.yaml
+number: !include test.common.number.yaml
+sensor: !include test.common.sensor.yaml
+switch: !include test.common.switch.yaml
\ No newline at end of file